Display And Status Line; Display - Fronius TPS 320i Operating Instructions Manual

Display and status line

Display

No.
(1)
(2)
(3)
(4)
(5)
(6)
(1)
(2)
Function
The status line
provides details on:
- the current welding process
- the current operating mode
- the current welding program (material, shielding gas and wire diameter)
- active faults
- time and date
Left-hand ribbon
The left-hand ribbon contains the following buttons:
- Welding
- Welding process
- Process parameters
- Defaults
The buttons in the left-hand ribbon are actuated by touching the display.
Actual value display
Welding current, welding voltage, wire feed speed
Main area
The welding parameters, graphics, lists or navigation elements are shown in the
main area. The structure of the main area and the elements shown in it vary ac-
cording to the application.
The main area is controlled
- with the adjusting dial
- by touching the display.
Right-hand ribbon
Depending on the buttons selected in the left-hand ribbon, the right-hand ribbon
may be used as follows:
- as a function ribbon containing application and function buttons
- for navigating through the 2nd menu level
The buttons in the right-hand ribbon are actuated by touching the display.
HOLD indicator
At the end of each welding operation, the actual values for the welding current
and voltage are stored - HOLD lights up.
(3) (4)
(6)
(5)
45