Backup & Restore; Backup (Start Back Up); Restore (Search Restore-File) - Fronius TPS 320i Operating Instructions Manual

Backup & Restore
Backup & Restore In the Backup & Restore entry,
-
-
Backup (Start
1
back up)
Restore (Search
1
restore-file)
2
3
142
all the welding system data can be saved as a backup (e.g. current parameter settings,
jobs, user characteristics, defaults, etc.).
existing backups can be re-saved in the welding system.
To store the welding system data as a backup, click the "Start back up" button
The data is saved by default in the format MCU1-YYYYMMDDHHmm.fbc at a location
that can be selected.
YYYY = year
MM = month
DD = day
HH = hour
mm = minute
The date and time information matches the settings on the power source.
To transfer an existing backup to the power source, click on the "Search restore-file"
button
Select the file and click "Open"
The selected backup file will be displayed on the power source website under Restore.
Click the "Start restore" button
Once the data has been successfully restored, confirmation is displayed on the
screen.