Minimum Equipment Needed For Welding Task; General; Mig/Mag Gas-Cooled Welding; Mig/Mag Water-Cooled Welding - Fronius TPS 320i Operating Instructions Manual

Minimum equipment needed for welding task

General

Depending on which welding process you intend to use, a certain minimum equipment lev-
el will be needed in order to work with the power source.
The welding processes and the minimum equipment levels required for the welding task
are then described.
MIG/MAG gas- -
cooled welding -
-
-
-
-
-
MIG/MAG water- -
cooled welding -
-
-
-
-
-
-
MIG/MAG auto- -
mated welding -
-
-
-
-
-
-
Manual CMT -
welding -
-
-
-
-
-
-
-
Power source
Grounding (earthing) cable
MIG/MAG welding torch, gas-cooled
Shielding gas supply
Wire-feed unit
Interconnecting hosepack
Wire electrode
Power source
Cooling unit
Grounding (earthing) cable
MIG/MAG welding torch, water-cooled
Shielding gas supply
Wire-feed unit
Interconnecting hosepack
Wire electrode
Power source
Robot interface or field bus connection
Grounding cable
MIG/MAG robot welding torch or automatic MIG/MAG welding torch
A cooling unit is also required with water-cooled robot or machine welding torches.
Gas connection (shielding gas supply)
Wirefeeder
Interconnecting hosepack
Wire electrode
Power source
Standard, Pulse and CMT welding packages enabled on the power source
Grounding cable
PullMig CMT welding torch incl. CMT drive unit and CMT wire buffer
IMPORTANT! For water-cooled CMT applications, a cooling unit is also required!
OPT/i PushPull
Wirefeeder
CMT interconnecting hosepack
Wire electrode
Gas connection (shielding gas supply)
49