Status line
The status line is divided into segments and contains the following details:
(1)
(2)
(3)
(4)
Status bar – Cur-
If the characteristic-dependent current limit is reached while MIG/MAG welding, a corre-
rent limit reached
sponding message appears in the status bar.
1
The information appears.
2
3
Further information on the current limit can be found in the Troubleshooting section on
page 159.
46
(1)
(2)
Current welding process
Current operating mode
Current welding program (material, shielding gas and wire diameter)
Time and date
Current limit exceeded!
For detailed information, select the status bar
Select "Hide information" to exit
Reduce the wire speed, welding current, welding voltage or material thickness
or
Increase the distance between the contact tip and the workpiece
(3)
1
(4)