Fronius TPS 270i C Quick Manual
Hide thumbs
Also See for TPS 270i C:
- Operating instructions manual (148 pages) ,
- Operating instructions manual (152 pages) ,
- Operating instructions manual (172 pages)
Table of Contents
Advertisement
Quick Links
/ Perfect Welding
/ Solar Energy / Perfect Charging
TPS 270i C
Quick Guide
SAFETY
Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.
This document only describes the most important functions of the device. For a complete description of the device, refer to the Operating Instructions.
1 Set the filler metal and shielding gas
- Open the material
- Turn and press to
4
Set the welding power
Sheet thickness
Welding current
Wire speed
Special function F1
- select desired parameter
- set desired parameter
Status indicators:
(light up when the
respective function is
active)
42,0426,0248,EN
002-16082017
2 Set the welding process
selection
enable the desired
5
Adjust the parameters for correction
Arc length stabilizer
Penetration stabilizer
2 Set the operating mode
- Press to select the desired
welding process
Text display:
- Activate / deactivate = press left adjusting dial
Arc length correction
- Scroll through full text = turn left adjusting dial
Welding voltage
Pulse/dynamic correc-
Abbreviation
tion
Special function F1
- select desired parameter
- set desired parameter
Spatter Free Ignition
SynchroPulse
Voltage Reduction Device
- Press to select the desired
mode
Full text
Operating Instructions:
www.fronius.com/tpsi-manuals
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fronius TPS 270i C
Summary of Contents for Fronius TPS 270i C
- Page 1 / Perfect Welding / Solar Energy / Perfect Charging TPS 270i C Quick Guide SAFETY Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online. This document only describes the most important functions of the device. For a complete description of the device, refer to the Operating Instructions.
- Page 2 Entering/exiting the Setup menu Activating/deactivating the key lock Favourite The Favourite key can be assigned the Setup parameter or Setup folder that is currently selected. Retrieve: Process parameters Start/End Save: Starting current (135) Start arc length correction (0) Delete: Starting current time (off) Slope 1 (1.0) Slope 2 (1.0) Final current (50)
Need help?
Do you have a question about the TPS 270i C and is the answer not in the manual?
Questions and answers