Defaults; General Remarks; Overview - Fronius TPS 320i Operating Instructions Manual

Defaults

General remarks

Overview

"Defaults" contains the following options:
Under the "View" button
Language
Time & Date
System data
Under the "System" button
Information
Website password
Network settings
Under the "Documentation" button
Basic settings
* currently only displays welding operations
NOTE! As a result of firmware updates, you may find that there are functions
available on your unit that are not described in these operating instructions or vice
versa. Certain illustrations may also differ slightly from the actual control elements
on your device. However, these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
Units / Standards
EasyJobs
Synergic lines
Restore factory settings
Mode Setup
Power source configurations
Logbook *
127