Job Mode; General; Storing Settings As A Job - Fronius TPS 320i Operating Instructions Manual

Job mode

General

Up to 1000 jobs can be stored and retrieved in the power source.
This eliminates the need for manual documenting of the welding parameters.
"Job mode" enhances the quality of automated and manual applications.
Jobs can only be stored when in welding mode. When storing jobs, the process parameters
and certain machine defaults are taken into account in addition to the present welding set-
tings.
Storing settings
1
as a job
2
The job list is displayed.
To overwrite an existing job, select it by turning and pressing the adjusting dial (or selecting
"Next").
The selected job can be overwritten after acknowledging the confirmation prompt.
Select "Create a new Job" to create a new job
3
The next free job number is displayed.
4
5
The keyboard is displayed.
80
Set the parameters that are to be stored as a job:
- Welding parameters
- Welding process
- Process parameters
- Machine defaults (if necessary)
Select "Save as Job"
Press the adjusting dial / select "Next"
Turn the adjusting dial and select the desired storage location
Press the adjusting dial / select "Next"
2