Settings; Language Selection - Fronius TPS 320i Operating Instructions Manual

Settings

Example:
The unit "metric" and the standard "EN" is set on the power source.
Under the settings, the additional display of the alternative unit or standard can now be ac-
tivated using a selection box.
The values set on the power source are now displayed with a greyed-out selection box and
cannot be changed.
If the selection boxes for the alternative unit or standard are activated, characteristics, ma-
terial specifications and certain welding parameters are displayed with designations corre-
sponding to both standards and with values corresponding to both units.
Language selec-
tion
The language that is currently set is highlighted in white.
To change the language, click on the one you would like.
144
The display of characteristics, material specifications and certain welding
parameters can be expanded on the power source website by clicking on
this symbol.
An alternative unit or standard can also be displayed in addition to the units
and standards set on the power source.
The languages available for the power source website can be displayed by
clicking on the language abbreviation.