Loading A Job - Fronius TPS 320i Operating Instructions Manual

Loading a job

The load job function can be used to load the data for a saved job or an EasyJob to the
welding screen. The relevant data from the job is displayed in the welding parameters and
can be changed, saved as a new job or EasyJob, or used to start welding.
1
The job list is displayed.
2
3
The load job information is shown.
4
The data for the selected job is loaded onto the welding screen.
The data for the loaded job can now be used for welding (no job mode), changed, or be
saved as a new job or an EasyJob.
84
Select "Save as Job"
(also works in Job mode)
Turn the adjusting dial and select the job to be loaded
Select "load Job"
Select "Yes"
1