Displaying The Welding Circuit Inductivity L; General; Displaying The Welding Circuit Inductivity; Laying The Hosepacks Correctly - Fronius TransSteel 2700c MultiProzess Operating Instructions Manual

Displaying the Welding Circuit Inductivity L

General

The way that the hosepack is arranged has a very significant effect on the weld-
ing circuit inductivity and therefore affects the welding process. It is important
to lay the hosepacks correctly in order to obtain the best possible welding result.
Displaying the The setup parameter "L" is used to display the most recently calculated welding
welding circuit circuit inductivity. The welding circuit inductivity is adjusted when the welding
inductivity circuit resistance is measured. Detailed information in this regard can be found
under the "Welding circuit resistance" chapter.
1
2
The most recently calculated welding circuit inductivity L is shown on the right-
hand digital display.
L ... Welding circuit inductivity (in microhenrys)
Laying the
hosepacks cor-
rectly
Access the Setup menu 2nd level (2nd)
Select parameter "L"
123