Monitor - Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual

Monitor

The High/Low states of I/O terminals and count values are displayed in the hardware logic outline window or a multi function
counter block detail window.
The following lists the items that can be monitored.
Window
Hardware logic outline window
Multi function counter block detail window
How to use
The following shows how to start, stop, and end the monitoring.
[Online]  [Monitor]  [Start Monitoring], [Stop Monitoring], or [End Monitoring]
The monitoring can be started, stopped, or ended under the following conditions.
Operation
[Start Monitoring]
[Stop Monitoring]
[End Monitoring]
*1 The current window mode can be checked on the status bar.
Although switching of the window between the hardware logic outline window and multi function counter block
detail windows and changing of the display position by the map display window are allowed even during
monitoring, operations other than them cannot be executed.
Block
External input block
Multi function counter block
External output block
Counter timer block
Condition
Can be used when the window mode
Can be used when the window mode
Can be used when the window mode
Item
ON/OFF state of the corresponding external input terminal
High/Low state of the output terminal
High/Low state of the Output 0 terminal
High/Low state of the input terminal
ON/OFF state of the corresponding external output terminal
• Internal action state of the input terminal
• Count value
*1
is "Edit Mode" or "Monitor Mode".
*1
is "Monitor Mode".
*1
is "Monitor Mode".
8 FUNCTIONS OF THE CONFIGURATION TOOL
93
8.9 Online Functions
8