Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual page 229

■Program example 3
A program example to start the hardware logic control
(1) Turn on Hardware logic control start request (Y1004).
(2) Turn off Hardware logic control start request (Y1004).
■Program example 4
A program example to stop the hardware logic control
(1) Turn on Hardware logic control stop request (Y1005).
(2) Turn off Hardware logic control stop request (Y1005).
■Program example 5
A program example to read the count value
(1) Read the count value.
■Program example 6
A program example to reset the operating condition settings in a batch
(1) Turn on Operating condition settings batch-reset command (Y1003).
(2) Turn off Operating condition settings batch-reset command (Y1003).
13.3 When the Module Is Connected to a Head Module
(1)
(2)
(1)
(2)
(1)
(1)
(2)
13 PROGRAMMING
227
13