Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual page 220

User devices
Device
M100
M110
M111
M112
M113
M114
M120
M200, M201
M210, M211
M220, M221
M300
M310
M1000
M1001
M1002
M1003
D100 (W1010)
D200, D201
D1000
D1010, D1011
F200
F210
F220
13 PROGRAMMING
218
13.3 When the Module Is Connected to a Head Module
Description
Setting start command
Hardware logic control start command
Hardware logic control stop command
Count value read command
Operating condition batch-reset command
Hardware logic control stop flag clear command at disconnection
Error reset command
Write complete flag
Read complete flag 1
Read complete flag 2
Count value reading flag
Number of writes to a flash ROM reading flag
Communication ready flag (station number 1)
Setting request at a startup
Setting request signal
Setting complete flag at a startup
Storing the latest error code
Storing the cumulative number of write accesses to a flash ROM
Storing the clear setting of error history
Count value
Parameter write complete with an error
Count value read complete with an error
Number of writes to a flash ROM read complete with an error