Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual page 214

Creating a hardware logic
Create a hardware logic with the configuration tool.
■Link and settings in the hardware logic outline window
1.
Arrange a 32-bit unsigned multi function counter block in the hardware logic outline window, and link it to external input
blocks.
• To perform external outputs according to the counting result, link the multi function counter block to an external output
block.
• To start an interrupt program according to the counting result, link the multi function counter block to an SI device terminal.
( Page 216 Interrupt program example)
2.
Set the external input blocks according to the specifications of external input signals.
3.
To use the external output block, set it according to the specifications of external output signals and desired output
timings.
13 PROGRAMMING
212
13.2 When the Module Is Used with the Standard System Configuration