Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual page 225

Creating a hardware logic
Create a hardware logic with the configuration tool.
■Link and settings in the hardware logic outline window
1.
Arrange a 32-bit unsigned multi function counter block in the hardware logic outline window, and link it to external input
blocks.
• To perform external outputs according to the counting result, link the multi function counter block to an external output
block.
2.
Set the external input blocks according to the specifications of external input signals.
3.
To use the external output block, set it according to the specifications of external output signals and desired output
timings.
13.3 When the Module Is Connected to a Head Module
13 PROGRAMMING
223
13