Appendix 5 Added And Changed Functions - Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual

Appendix 5
The following table lists the added or changed functions of the flexible high-speed I/O control module, the configuration tool,
and GX Works2.
Addition/Change
Security
Read from module (Flash ROM)
SSI encoder block
Changes of an external output block
• Addition of Forced Output
• Addition of External terminal
monitor
Changes of a comparison block
• Coincidence or Range can be
selected for Condition.
• Compare values can be changed.
An event input terminal can be linked
with a Latch terminal of a counter
timer block.
Switching the language
Copying a block
Pasting a block
Library function
Verifying with the module (Flash
ROM)
Module operation
Addition of monitorable terminals
• External input terminal
corresponding to an external input
block
• Output 0 terminal of a multi function
counter block
• External output terminal
corresponding to an external output
block
Connecting to a head module
Adding a module, switch setting, auto
refresh with GX Works2
APPENDICES APPENDIX
254

Appendix 5 Added and Changed Functions

Added and Changed Functions
Upper five digits of the Applicable version
applicable product of the configuration
information number of tool
the flexible high-speed
I/O control module

Version 1.001B
17102 or later Version 1.002C

17102 or later

19022 or later
Applicable version Reference
of GX Works2
 Page 74 Security
Page 90 Reading data
from the module
Page 114 SSI encoder
block
Page 123 External output
block
Page 158 Comparison
block
Page 135 Event input
terminal
Page 66 Switching the
Language
Page 83 Copying a block
Page 84 Pasting a block
Page 85 Library Function
Page 91 Verifying with the
module
Page 92 Module
operation
Page 93 Monitor
Page 34 SYSTEM
1.560J or later
CONFIGURATION
Page 204 SETTINGS