Settings on the master station side
1.
Create a project of GX Works2.
Select "QCPU (Q mode)" in "Series" and select "Q10UDH" in "Type".
[Project] [New]
2.
Display the setting window for the network parameters and set the values as follows.
[Project window] [Parameter] [Network Parameter] [Ethernet / CC IE / MELSECNET]
3.
Display the setting window for the network configuration settings and set the values as follows.
[Project window] [Parameter] [Network Parameter] [Ethernet / CC IE / MELSECNET]
button
13.3 When the Module Is Connected to a Head Module
13 PROGRAMMING
219
13