Setting on the intelligent device station side
1.
Create a project of GX Works2.
Select "LCPU" in "Series" and select "LJ72GF15-T2" in "Type".
[Project] [New]
2.
Display the setting window for the PLC parameters and set the values as follows.
[Project window] [Parameter] [PLC Parameter] "Communication Head Setting"
3.
Add the flexible high-speed I/O control module (LD40PD01) to the project of GX Works2.
[Project window] [Intelligent Function Module] Right-click [New Module]
13.3 When the Module Is Connected to a Head Module
13 PROGRAMMING
221
13