Grandstream Networks UCM6510 User Manual page 59

Voicemail Password
Call Forward Unconditional
Call Forward No Answer
Call Forward Busy
Ring Timeout
Auto Record
Skip Voicemail Password
Verification
User Settings
First Name
Last Name
Email Address
Language
Firmware Version 1.0.0.5
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated.
It is recommended to use the random generated password for security
purpose.
Configure the Call Forward Unconditional target number. If not
configured, the Call Forward Unconditional feature is deactivated. The
default setting is deactivated.
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Configure the Call Forward Busy target number. If not configured, the
Call Forward Busy feature is deactivated. The default setting is
deactivated.
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting
under web GUI->Internal Options->IVR Prompt: General Preference.
The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring
timeout used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The
default setting is disabled. The recording files will be saved in external
storage if plugged
GUI->CDR->Recording Files.
When user dials voicemail code, the password verification IVR is
skipped. If enabled, this would allow one-button voicemail access. By
default this option is disabled.
Configure the first name of the user. The first name can contain
characters, letters, digits and _.
Configure the last name of the user. The last name can contain
characters, letters, digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Select the voice prompt language to be used for this extension. The
UCM6510 IP PBX User Manual
in and can be accessed under web
Page 58 of 192