No Local Firmware Servers; Backup - Grandstream Networks UCM6510 User Manual

Note:
Please do not interrupt or power cycle the UCM6510 during upgrading process.

NO LOCAL FIRMWARE SERVERS

For users that would like to use remote upgrading without a local TFTP server, Grandstream offers a
NAT-friendly HTTP server. This enables users to download the latest software upgrades for their devices
via this server. Please refer to the webpage:
http://www.grandstream.com/support/firmware.
Alternatively, users can download a free TFTP or HTTP server and conduct a local firmware upgrade. A
free windows version TFTP server is available for download from :
http://www.solarwinds.com/products/freetools/free_tftp_server.aspx
http://tftpd32.jounin.net
Instructions for local firmware upgrade via TFTP:
1. Unzip the firmware files and put all of them in the root directory of the TFTP server;
2. Connect the PC running the TFTP server and the UCM6510 to the same LAN segment;
3. Launch the TFTP server and go to the File menu->Configure->Security to change the TFTP server's
default setting from "Receive Only" to "Transmit Only" for the firmware upgrade;
4. Start the TFTP server and configure the TFTP server in the UCM6510 web configuration interface;
5. Configure the Firmware Server Path to the IP address of the PC;
6. Update the changes and reboot the UCM6510.
End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server.

BACKUP

The UCM6510 configuration can be backed up locally or via network. The backup file will be used to
restore the configuration on UCM6510 when necessary.
Firmware Version 1.0.0.5 UCM6510 IP PBX User Manual Page 183 of 192