Batch Add Iax Extensions; Table 21: Batch Add Iax Extension Parameters - Grandstream Networks UCM6510 User Manual

Skip Trunk Auth
Codec Preference

BATCH ADD IAX EXTENSIONS

Under web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add
IAX Extensions".
General
Start Extension
Create Number
Permission
Enable Voicemail
SIP/IAX Password
Voicemail Password
Firmware Version 1.0.0.5
If enabled, users will not need enter the "PIN Set" required by the
outbound rule to make outbound calls. The default setting is "No".
Select audio and video codec for the extension. The available codecs
are: PCMU, PCMA, GSM, AAL2-G.726-32, G.722, G.729, G.723, ILBC,
ADPCM, LPC10, H.264, H.263 and H.263p.

Table 21: Batch Add IAX Extension Parameters

Configure the starting extension number of the batch of extensions to be
added.
Specify the number of extensions to be added. The default setting is 5.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls from this rule.
Enable Voicemail for the user. The default setting is "Yes".
Configure the SIP/IAX password for the users. Three options are
available to create password for the batch of extensions.

User Random Password.
A random secure password will be automatically generated. It is
recommended to use this password for security purpose.

Use Extension as Password.

Enter a password to be used on all the extensions in the batch.
Configure Voicemail password (digits only) for the users.

User Random Password.
A random password in digits will be automatically generated. It is
recommended to use this password for security purpose.

Use Extension as Password.

Enter a password to be used on all the extensions in the batch.
UCM6510 IP PBX User Manual Page 63 of 192