Ivr; Configure Ivr; Table 33: Ivr Configuration Parameters - Grandstream Networks UCM6510 User Manual

Ip pbx
Hide thumbs Also See for UCM6510:
Table of Contents

Advertisement

CONFIGURE IVR

IVR configurations can be accessed under the UCM6510 web GUI->PBX->Call Features->IVR. Users
could create, edit, view and delete an IVR.
Click on "Create New IVR" to add a new IVR.
Click on
to edit the IVR configuration.
Click on
to delete the IVR.
Name
Extension
Dial Other Extensions
Dial Trunk
Permission
Welcome Prompt
Digit Timeout
Response Timeout
Firmware Version 1.0.0.5

IVR

Table 33: IVR Configuration Parameters

Configure the name of the IVR. Letters, digits, _ and - are allowed.
Enter the extension number for users to access the IVR.
If enabled, all callers to the IVR can dial other extensions. The default
setting is "No".
If enabled, all callers to the IVR is allowed to use trunk. The permission
must be configured for the users to use the trunk first. The default setting
is "No".
Assign permission level for outbound calls if "Dial Trunk" is enabled. The
available
permissions
"International" from the lowest level to the highest level. The default
setting is "Internal". If the user tries to dial outbound calls after dialing
into the IVR, the UCM6510 will compared the IVR's permission level with
the outbound route's privilege level. If the IVR's permission level is
higher than (or equal to) the outbound route's privilege level, the call will
be allowed to go through.
Select an audio file to play as the welcome prompt for the IVR. Click on
"Prompt" to add additional audio file under web GUI->Internal
Options->IVR Prompt.
Configure the timeout between digit entries. After the user enters a digit,
the user needs to enter the next digit within the timeout. If no digit is
detected within the timeout, the UCM6510 will consider the entries
complete. The default timeout is 3 seconds.
After playing the prompts in the IVR, the UCM6510 will wait for the
DTMF entry within the timeout (in seconds). If no DTMF entry is
UCM6510 IP PBX User Manual
are
"Internal",
"Local",
"National"
and
Page 104 of 192

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents