Voip Trunks; Voip Trunk Configuration; Table 27: Sip Trunk Configuration Parameters - Grandstream Networks UCM6510 User Manual

VOIP TRUNK CONFIGURATION

VoIP trunks can be configured in UCM6510 under web GUI->PBX->Basic/Call Routes->VoIP Trunks.
Once created, the VoIP trunks will be listed with Provider Name, Type, Hostname/IP, Username and
Options to edit/detect the trunk.

Click on "Create New SIP Trunk" or "Create New IAX Trunk" to add a new VoIP trunk.

Click on to configure detailed parameters for the VoIP trunk.

Click on to configure Direct Outward Dialing (DOD) for the SIP Trunk.

Click on to start LDAP Sync.

Click on to delete the VoIP trunk.
The VoIP trunk options are listed in the table below.
Create New SIP Trunk
Type
Provider Name
Host Name
Keep Trunk CID
Username
Password
Auth ID
Outbound Proxy
Firmware Version 1.0.0.5

VOIP TRUNKS

Table 27: SIP Trunk Configuration Parameters

Select the VoIP trunk type.

Peer SIP Trunk

Register SIP Trunk
Configure a unique label to identify this trunk when listed in outbound
rules, inbound rules and etc.
Configure the IP address or URL for the VoIP providers server of the
trunk.
If enabled, the trunk CID will not be overridden by extension's CID when
the extension has CID configured. The default setting is "No".
Enter the username to register to the trunk from the provider when
"Register SIP Trunk" type is selected.
Enter the password to register to the trunk from the provider when
"Register SIP Trunk" is selected.
Enter the Authentication ID for "Register Trunk" type.
Enter the IP address or URL of the outbound proxy for "Register SIP
UCM6510 IP PBX User Manual Page 82 of 192