Grandstream Networks UCM6510 User Manual page 106

Response Timeout Prompt
Invalid Prompt
Response Timeout Repeat
Loops
Invalid Repeat Loops
Language
Key Press Event
Firmware Version 1.0.0.5
detected within the timeout, a timeout prompt will be played. The default
setting is 10 seconds.
Select the prompt message to be played when timeout occurs.
Select the prompt message to be played when an invalid extension is
pressed.
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Select the voice prompt language to be used for this IVR. The default
setting is "Default" which is the selected voice prompt language under
web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the
UCM6510. To add more languages in the list, please download voice
prompt package by selecting "Check Prompt List" under web
GUI->PBX->Internal Options->Language.
Select the event for each key pressing for 0-9, *, Timeout and Invalid.
The event options are:

Extension

Voicemail

Conference Rooms

Voicemail Group

IVR

Ring Group

Queues

Page Group

Fax

IVR Prompt

Hangup

DISA

Dial By Name
UCM6510 IP PBX User Manual Page 105 of 192