Grandstream Networks UCM6510 User Manual page 65

Ip pbx
Hide thumbs Also See for UCM6510:
Table of Contents

Advertisement

Ring Timeout
Auto Record
Skip Voicemail Password
Verification
IAX Settings
Max Number of Calls
Require Call Token
Other Settings
SRTP
Fax Detection
Strategy
Firmware Version 1.0.0.5
Configure the number of seconds to ring the user before the call is
forwarded to voicemail (voicemail is enabled) or hang up (voicemail is
disabled). If not specified, the default ring timeout is 60 seconds on the
UCM6510, which can be configured in the global ring timeout setting
under web GUI->Internal Options->IVR Prompt: General Preference.
The valid range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring
timeout used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The
default setting is disabled. The recording files will be saved in external
storage
if
plugged
GUI->CDR->Recording Files.
When user dials voicemail code, the password verification IVR is
skipped. If enabled, this would allow one-button voicemail access. By
default this option is disabled.
Configure the maximum number of calls allowed for each remote IP
address.
Configure to enable/disable requiring call token. If set to "Auto", it might
lock out users who depend on backward compatibility when peer
authentication credentials are shared between physical endpoints. The
default setting is "Yes".
Enable SRTP for the call. The default setting is "No".
Enable to detect Fax signal from the user/trunk during the call and send
the received Fax to the Email address configured for this extension. If no
Email address can be found for the user, send the received Fax to the
default
Email
address
GUI->PBX->Internal Options->Fax/T.38.
Note:
If enabled, Fax Pass-through cannot be used.
This option controls how the extension can be used on devices within
different types of network.
Allow All
Device in any network can register this extension.
UCM6510 IP PBX User Manual
in
and
can
be
accessed
in
Fax
setting
under
web
page
under
web
Page 64 of 192

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents