Display Name
Sender
The following figure shows a sample Email settings on the UCM6510, assuming the Email is using
smtp.gmail.com as the SMTP server.
Once the configuration is finished, click on "Test". In the prompt, fill in a valid Email address to send a test
Email to verify the Email settings on the UCM6510.
Firmware Version 1.0.0.5
when using type "Client".
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example, pbx@example.mycompany.com.
Figure 13: UCM6510 Email Settings
UCM6510 IP PBX User Manual
Page 41 of 192