Figure 48: Page/Intercom Group Settings - Grandstream Networks UCM6510 User Manual


Click on to delete the paging/intercom group.

Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the
SIP INVITE message sent to the callee in paging/intercom call.

The UCM6510 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81
and the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to web GUI->PBX->Internal
Options->Feature Codes directly.
Firmware Version 1.0.0.5

Figure 48: Page/Intercom Group Settings

UCM6510 IP PBX User Manual Page 119 of 192