Figure 78: System Events->Alert Events Lists: Memory Usage; Figure 79: System Events->Alert Events Lists: System Reboot; Figure 80: System Events->Alert Events Lists: System Update - Grandstream Networks UCM6510 User Manual

3. Memory Usage

Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.

Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
4. System Reboot

Detect Cycle: The UCM6510 will check the system reboot based on this cycle. Users can enter the
number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
5. System Update

Detect Cycle: The UCM6510 will check the system update based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
Firmware Version 1.0.0.5
Figure 78: System Events->Alert Events Lists: Memory Usage
Figure 79: System Events->Alert Events Lists: System Reboot
Figure 80: System Events->Alert Events Lists: System Update
UCM6510 IP PBX User Manual Page 167 of 192