Grandstream Networks UCM6510 User Manual page 100

Enable Caller Menu
Record Conference
Quiet Mode
Wait For Admin
Enable User Invite
Announce Callers
Public Mode
Play Hold Music For First
Caller
Music On Hold
Firmware Version 1.0.0.5
If enabled, conference participant could press the * key to access the
conference bridge menu. The default setting is "No".
If enabled, the calls in this conference bridge will be recorded
automatically in a .wav format file. All the recording files will be displayed
and can be downloaded in the conference web page. The default setting
is "No".
If enabled, if there are users joining or leaving the conference, voice
prompt or notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same
time.
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not
be announced.
If enabled, users could press 0 to invite other users (with the users'
permission) or press 1 to invite other users (without the user's
permission) to join the conference. The default setting is "No".
Note:
Conference administrator can always invite other users without enabling
this option.
If enabled, the caller will be announced to all conference participants
when there the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same
time.
If enabled, no authentication will be required when joining the
conference call. The default setting is "Yes".
If enabled, the UCM6510 will play Hold music to the first participant in
the conference until another user joins in. The default setting is "No".
Select the music on hold class to be played in conference call. This
option shows up if "Play Hold Music For First Caller" is enabled. Music
On Hold class can be set up under web UI->PBX->Internal
Options->Music On Hold.
UCM6510 IP PBX User Manual Page 99 of 192