Extension Groups; Configure Extension Groups; Use Extension Groups; Figure 51: Edit Extension Group - Grandstream Networks UCM6510 User Manual

The UCM6510 extension group feature allows users to assign extensions to different groups to better
manage the configurations on the PBX. For example, when configuring "Enable Filter on Source Caller ID",
users could select a group instead of each person's extension to assign. This feature simplifies the
configuration process and helps manage and categorize the extensions for business environment.

CONFIGURE EXTENSION GROUPS

Extension group can be configured via web GUI->PBX->Call Features->Extension Groups.

Click on "Create New Extension Group" to create a new extension group.

Click on to edit the extension group.
Select extensions from the list on the left side to the right side.

Click on to delete the extension group.

USE EXTENSION GROUPS

Here is an example where the extension group can be used. Go to web GUI->PBX->Basic/Call
Routes->Outbound Routes and select "Enable Filter on Source Caller ID". Both single extensions and
extension groups will show up for users to select.
Firmware Version 1.0.0.5

EXTENSION GROUPS

Figure 51: Edit Extension Group

UCM6510 IP PBX User Manual Page 123 of 192