HP MSR2000 series Configuration Manual page 124

[SwitchD-ospf-1] return
# Display OSPF neighbor information on Switch A.
[SwitchA] display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.1
Area 0.0.0.0 interface 192.168.1.1(Vlan-interface1)'s neighbors
Router ID: 2.2.2.2
State: 2-Way
DR: 192.168.1.4
Dead timer due in 38
Neighbor is up for 00:01:31
Authentication Sequence: [ 0 ]
Router ID: 3.3.3.3
State: Full
DR: 192.168.1.4
Dead timer due in 31
Neighbor is up for 00:01:28
Authentication Sequence: [ 0 ]
Router ID: 4.4.4.4
State: Full
DR: 192.168.1.4
Dead timer due in 31
Neighbor is up for 00:01:28
Authentication Sequence: [ 0 ]
Switch D becomes the DR, and Switch C is the BDR.
Configure router priorities on interfaces:
3.
# Configure Switch A.
[SwitchA] interface vlan-interface 1
[SwitchA-Vlan-interface1] ospf dr-priority 100
[SwitchA-Vlan-interface1] quit
# Configure Switch B.
[SwitchB] interface vlan-interface 1
[SwitchB-Vlan-interface1] ospf dr-priority 0
[SwitchB-Vlan-interface1] quit
# Configure Switch C.
[SwitchC] interface vlan-interface 1
[SwitchC-Vlan-interface1] ospf dr-priority 2
[SwitchC-Vlan-interface1] quit
# Display neighbor information on Switch D.
<SwitchD> display ospf peer verbose
OSPF Process 1 with Router ID 4.4.4.4
Neighbors
Address: 192.168.1.2
Mode: None Priority: 1
BDR: 192.168.1.3
sec
Address: 192.168.1.3
Mode: Nbr is Master
BDR: 192.168.1.3
sec
Address: 192.168.1.4
Mode: Nbr is Master
BDR: 192.168.1.3
sec
Neighbors
111
GR State: Normal
MTU: 0
GR State: Normal
Priority: 1
MTU: 0
GR State: Normal
Priority: 1
MTU: 0