HP MSR2000 series Configuration Manual page 429

127.0.0.1/32
192.168.0.0/24
The output shows that the MCE has learned the private route of VPN 1 through OSPF process 10.
# On MCE, bind OSPF process 20 with VPN instance vpn2 to learn the routes of VPN 2. The
configuration procedure is similar to that for OSPF process 10.
The following output shows that the MCE has learned the private route of VPN 2 through OSPF:
[MCE] display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5
Destination/Mask
10.214.20.0/24
10.214.20.3/32
127.0.0.0/8
127.0.0.1/32
192.168.0.0/24
Configure routing between the MCE and PE 1:
3.
# Configure the connecting ports between the MCE and PE 1 as trunk ports. The configuration
procedure is similar to that described in
not shown.)
# Start BGP process 100 on the MCE, and enter the IPv4 address family view of VPN instance
vpn1.
[MCE] bgp 100
[MCE-bgp] ipv4-family vpn-instance vpn1
# Specify PE 1 as the EBGP peer of the MCE, and redistribute the routing information of OSPF
process 10. (The IP address of PE 1's interface bound with VPN instance vpn1 is 10.100.10.3,
and the BGP process is 200.)
[MCE-bgp-vpn1] peer 30.1.1.2 as-number 200
[MCE-BGP-vpn1] import-route ospf 10
# On PE 1, configure BGP process 200 and specify the MCE as its EBGP peer.
<PE1> system-view
[PE1] bgp 200
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] peer 30.1.1.1 as-number 100
[PE1-bgp-vpn1] quit
[PE1-bgp] quit
# On PE 1, display the routing information of VPN instance vpn1.
[PE1] display ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destinations : 5
Destination/Mask
30.1.1.0/24
30.1.1.2/32
127.0.0.0/8
Direct 0 0
OSPF 10 1
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
OSPF 10 1
"Using OSPF to advertise VPN routes to the
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
416
127.0.0.1 InLoop0
10.214.10.2 Vlan10
NextHop Interface
10.214.20.3 Vlan20
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
10.214.20.2 Vlan20
NextHop Interface
30.1.1.2 Vlan30
127.0.0.1 InLoop0
127.0.0.1 InLoop0
PE." (Details