Is-Is Authentication Configuration Example - HP MSR2000 series Configuration Manual

[SwitchD] ip ip-prefix abc index 10 permit 1.1.1.1 32
[SwitchD] route-policy frr permit node 10
[SwitchD-route-policy] if-match ip-prefix abc
[SwitchD-route-policy] apply fast-reroute backup-interface vlan-interface 101
backup-nexthop 24.24.24.2
[SwitchD-route-policy] quit
[SwitchD] isis 1
[SwitchD-isis-1] fast-reroute route-policy frr
[SwitchD-isis-1] quit
Verify the configuration:
4.
# Display route 4.4.4.4/32 on Switch S to view the backup next hop information.
[SwitchS] display ip routing-table 4.4.4.4 verbose
Routing Table : Public
Summary Count : 1
Destination: 4.4.4.4/32
Protocol: ISIS
Preference: 10
IpPrecedence:
BkNextHop: 12.12.12.2
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
# Display route 1.1.1.1/32 on Switch D to view the backup next hop information.
[SwitchD] display ip routing-table 1.1.1.1 verbose
Routing Table : Public
Summary Count : 1
Destination: 1.1.1.1/32
Protocol: ISIS
Preference: 10
IpPrecedence:
BkNextHop: 24.24.24.2
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0

IS-IS authentication configuration example

Network requirements
As shown in
domain.
NextHop: 13.13.13.2
State: Active Adv
Tag: 0
NextHop: 13.13.13.1
State: Active Adv
Tag: 0
Figure 69, Switch A, Switch B, Switch C and Switch D reside in the same IS-IS routing
Process ID: 1
Cost: 10
QosLcId:
Interface: Vlan-interface200
BkInterface: Vlan-interface100
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h01m27s
Process ID: 1
Cost: 10
QosLcId:
Interface: Vlan-interface200
BkInterface: Vlan-interface101
Neighbor : 0.0.0.0
Label: NULL
BKLabel: NULL
Age: 00h01m27s
178