To advertise a default route to a peer or peer group:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Advertise a default route to a
peer or peer group.
Configuring BGP route distribution/reception filtering policies
Configuration prerequisites
Configure following filters as needed:
ACL
•
•
IP prefix list
Routing policy
•
AS path list
•
For how to configure an ACL, see ACL and QoS Configuration Guide.
For how to configure an IP prefix list, routing policy, and AS path list, see
Configuring BGP route distribution filtering policies
Step
1.
Enter system view.
2.
Enter BGP view.
Command
system-view
bgp as-number
peer { group-name | ip-address }
default-route-advertise [ route-policy
route-policy-name ]
Command
system-view
bgp as-number
204
Remarks
N/A
N/A
Not advertised by
default.
"Configuring routing
Remarks
N/A
N/A
policies."