HP MSR2000 series Configuration Manual page 444

[MCE] interface vlan-interface 20
[MCE-Vlan-interface20] ripng 20 enable
[MCE-Vlan-interface20] quit
# On VR 2, assign IPv6 address 2002:1::2/64 to the interface connected to the MCE and
2012::2/64 to the interface connected to VPN 2. (Details not shown.)
# Configure RIPng, and advertise subnets 2012::/64 and 2002:1::/64.
<VR2> system-view
[VR2] ripng 20
[VR2-ripng-20] quit
[VR2] interface vlan-interface 20
[VR2-Vlan-interface20] ripng 20 enable
[VR2-Vlan-interface20] quit
[VR2] interface vlan-interface 21
[VR2-Vlan-interface21] ripng 20 enable
[VR2-Vlan-interface21] quit
# On MCE, display the routing tables of VPN instances vpn1 and vpn2.
[MCE] display ipv6 routing-table vpn-instance vpn1
Routing Table : vpn1
Destinations : 5
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2001:1::/64
NextHop : 2001:1::1
Interface : Vlan10
Destination: 2001:1::1/128
NextHop : ::1
Interface : InLoop0
Destination: 2012:1::/64
NextHop : 2001:1::2
Interface : Vlan10
Destination: FE80::/10
NextHop : ::
Interface : NULL0
[MCE] display ipv6 routing-table vpn-instance vpn2
Routing Table : vpn2
Destinations : 5
Destination: ::1/128
NextHop : ::1
Interface : InLoop0
Routes : 5
Routes : 5
431
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Static
Preference: 60
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0
Protocol : Direct
Preference: 0
Cost : 0