HP MSR2000 series Configuration Manual page 419

Step
5. Configure a filtering
policy to filter
advertised routes.
6. Return to system view.
7. Enter interface view.
8. Enable the IS-IS process
on the interface.
Configuring EBGP between MCE and PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance
view.
4. Configure the PE as the
EBGP peer.
5. Redistribute the VPN
routes of the VPN site.
6. Configure a filtering
policy to filter the routes
to be advertised.
7. Configure a filtering
policy to filter the
received routes.
NOTE:
BGP runs within a VPN in the same way as it runs within a public network. For more information about
Layer 3—IP Routing Configuration Guide
BGP, see
Configuring IBGP between MCE and PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP-VPN instance
view.
4. Configure the PE as the IBGP
peer.
Command
filter-policy { acl-number | ip-prefix
ip-prefix-name | route-policy
route-policy-name } export [ isis
process-id | ospf process-id | rip
process-id | bgp | direct | static ]
quit
interface interface-type interface-number
isis enable [ process-id ]
Command
system-view
bgp as-number
ipv4-family vpn-instance vpn-instance-name
peer { group-name | ip-address } as-number
as-number
import-route protocol [ process-id |
all-processes ] [ med med-value |
route-policy route-policy-name ] *
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ direct | isis
process-id | ospf process-id | rip process-id
| static ]
filter-policy { acl-number | ip-prefix
ip-prefix-name } import
.
Command
system-view
bgp as-number
ipv4-family vpn-instance
vpn-instance-name
peer { group-name | ip-address }
as-number as-number
406
Remarks
Optional.
By default, IS-IS does not filter
advertised routes.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
By default, no route
redistribution is configured.
Optional.
By default, BGP does not filter
the routes to be advertised.
Optional.
By default, BGP does not filter
the received routes.
Remarks
N/A
N/A
N/A
N/A