Configuring The Maximum Number Of Ospfv3 Ecmp Routes; Configuring A Priority For Ospfv3; Configuring Ospfv3 Route Redistribution - HP MSR2000 series Configuration Manual

Step
1. Enter system view.
2. Enter OSPFv3 view.
3. Configure a bandwidth
reference value.

Configuring the maximum number of OSPFv3 ECMP routes

Perform this task to implement load sharing over ECMP routes.
To configure the maximum number of ECMP routes:
Step
1. Enter system view.
2. Enter OSPFv3 view.
3. Specify the maximum number
of ECMP routes.

Configuring a priority for OSPFv3

A router may run multiple routing protocols. The system assigns a priority to each protocol. When these
routing protocols find the same route, the route found by the protocol with the highest priority is selected.
To configure a priority for OSPFv3:
Step
1. Enter system view.
2. Enter OSPFv3 view.
3. Configure a priority for
OSPFv3.

Configuring OSPFv3 route redistribution

Follow these guidelines when you configure OSPFv3 route redistribution:
Executing the import-route or default-route-advertise command on a router makes it become an
•
ASBR.
You can only inject and advertise a default route using the default-route-advertise command.
•
• Because OSPFv3 is a link state routing protocol, it cannot directly filter LSAs to be advertised. You
must filter redistributed routes first. Routes that are not filtered out can be advertised in LSAs into the
routing domain.
Command
system-view
ospfv3 [ process-id ]
bandwidth-reference value
Command
system-view
ospfv3 [ process-id ]
maximum load-balancing
maximum
Command
system-view
ospfv3 [ process-id ]
preference [ ase ] [ route-policy
route-policy-name ] preference
283
Remarks
N/A
N/A
Optional.
100 Mbps by default.
Remarks
N/A
N/A
Optional.
8 by default.
Remarks
N/A
N/A
Optional.
By default, the priority of OSPFv3 internal
routes is 10, and priority of OSPFv3
external routes is 150.