HP MSR2000 series Configuration Manual page 401

Hide thumbs Also See for MSR2000 series:
Table of Contents

Advertisement

[SwitchA] traffic classifier a
[SwitchA-classifier-a] if-match acl ipv6 2000
[SwitchA-classifier-a] quit
# Configure the action of redirecting traffic to the next hop 202::2 for behavior a.
[SwitchA] traffic behavior a
[SwitchA-behavior-a] redirect next-hop 202::2
[SwitchA-behavior-a] quit
# Associate class a with behavior a in QoS policy a.
[SwitchA] qos policy a
[SwitchA-qospolicy-a] classifier a behavior a
[SwitchA-qospolicy-a] quit
# Apply QoS policy a to the incoming traffic of GigabitEthernet 1/0/1.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] qos apply policy a inbound
Verifying the configuration
After completing the configuration, verify that when Switch A receives packets with destination IP address
201::2, it forwards the packets to Switch C instead of Switch B.
388

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr3000 seriesMsr4000 series

Table of Contents