HP MSR2000 series Configuration Manual page 430

127.0.0.1/32
192.168.0.0/24
# Perform similar configuration on the MCE and PE 1 for VPN 2. Redistribute the OSPF routes of
VPN instance vpn2 into the EBGP routing table. (Details not shown.)
The following output shows that PE 1 has learned the private route of VPN 2 through BGP:
[PE1] display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5
Destination/Mask
40.1.1.0/24
40.1.1.2/32
127.0.0.0/8
127.0.0.1/32
192.168.10.0/24
Now, the MCE has redistributed the OSPF routes of the two VPN instances into the EBGP routing
tables of PE 1.
Direct 0 0
BGP 255 2
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
BGP 255 2
417
127.0.0.1 InLoop0
30.1.1.1 Vlan30
NextHop Interface
40.1.1.2 Vlan40
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
40.1.1.1 Vlan40