HP MSR2000 series Configuration Manual page 180

Interface: Vlan-interface100
State: Up
# Display information about IS-IS interfaces of Switch A.
[SwitchA] display isis interface
Interface: Vlan-interface100
Id IPV4.State
001 Up
# Display information about IS-IS interfaces of Switch C.
[SwitchC] display isis interface
Interface: Vlan-interface100
Id IPV4.State
001 Up
# Display information about IS-IS interfaces of Switch D.
[SwitchD] display isis interface
Interface: Vlan-interface100
Id IPV4.State
001 Up
By using the default DIS priority, Switch C is the Level-1 DIS, and Switch D is the Level-2 DIS. The
pseudonodes of Level-1 and Level-2 are 0000.0000.0003.01 and 0000.0000.0004.01.
Configure the DIS priority:
3.
# Configure the DIS priority on Switch A.
[SwitchA] interface vlan-interface 100
[SwitchA-Vlan-interface100] isis dis-priority 100
[SwitchA-Vlan-interface100] quit
# Display IS-IS neighbors on Switch A.
[SwitchA] display isis peer
System Id: 0000.0000.0002
Interface: Vlan-interface100
State: Up
System Id: 0000.0000.0003
Interface: Vlan-interface100
State: Up
HoldTime: 30s
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Interface information for ISIS(1)
---------------------------------
IPV6.State
Down
Peer information for ISIS(1)
----------------------------
HoldTime: 21s
HoldTime: 27s
167
Circuit Id: 0000.0000.0004.01
Type: L2 PRI: 64
MTU Type DIS
1497 L1/L2 No/No
MTU Type DIS
1497 L1/L2 Yes/No
MTU Type DIS
1497 L1/L2 No/Yes
Circuit Id: 0000.0000.0001.01
Type: L1(L1L2)
Circuit Id: 0000.0000.0001.01
Type: L1
PRI: 64
PRI: 64