HP MSR2000 series Configuration Manual page 82

An AS external LSA is originated by an ASBR, and describes routing information to a destination
outside the AS.
Figure 35 AS external LSA format
Major fields of the AS external LSA are as follows:
Link state ID—The IP address of another AS to be advertised. When describing a default route,
the Link state ID is always set to default destination (0.0.0.0) and the network mask is set to
0.0.0.0
Network mask—The IP address mask for the advertised destination
E (External Metric)—The type of the external metric value, which is set to 1 for type 2 external
routes, and set to 0 for type 1 external routes. See
route types.
Metric—The metric to the destination.
Forwarding address—Data traffic for the advertised destination is forwarded to this address.
External route tag—A tag attached to each external route. This is not used by the OSPF
protocol. It may be used to manage external routes.
NSSA external LSA
•
An NSSA external LSA originates from the ASBR in an NSSA, and is flooded in the NSSA area
only. It has the same format as the AS external LSA.
"Route
69
types" for a description of external