Configuring RIPng timers
Adjust RIPng timers to optimize the performance of the RIPng network. When adjusting RIPng timers,
consider the network performance, and perform unified configurations on routers running RIPng to avoid
unnecessary network traffic increase or route oscillation.
To configure RIPng timers:
Step
1.
Enter system view.
2.
Enter RIPng view.
3.
Configure RIPng
timers.
Configuring split horizon and poison reverse
If both split horizon and poison reverse are configured, only the poison reverse function takes effect.
Configuring split horizon
The split horizon function disables a route learned from an interface from being advertised through the
same interface to prevent routing loops between neighbors. HP recommends enabling split horizon to
prevent routing loops.
To configure split horizon:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Enable the split horizon
function.
Configuring the poison reverse function
The poison reverse function enables a route learned from an interface to be advertised through the
interface. However, the metric of the route is set to 16 (unreachable).
To configure poison reverse:
Step
1.
Enter system view.
2.
Enter interface view.
Command
system-view
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
timers { garbage-collect
garbage-collect-value | suppress
suppress-value | timeout
timeout-value | update
update-value } *
Command
system-view
interface interface-type
interface-number
ripng split-horizon
Command
system-view
interface interface-type
interface-number
264
Remarks
N/A
N/A
Optional.
The RIPng timers have the following defaults:
•
30 seconds for the update timer
•
180 seconds for the timeout timer
•
120 seconds for the suppress timer
•
120 seconds for the garbage-collect timer
Remarks
N/A
N/A
Optional.
Enabled by default.
Remarks
N/A
N/A