Displaying And Maintaining The Routing Policy - HP MSR2000 series Configuration Manual

If you configure the apply community clause for multiple nodes that are combined by the continue
•
clause, the apply comm-list delete clause configured on the current node cannot delete the
COMMUNITY attributes of preceding nodes.
To define a continue clause:
Step
1. Enter system view.
2. Create a routing policy and
enter routing policy view.
3. Specify the next routing policy
node to be matched.

Displaying and maintaining the routing policy

Task
Display BGP AS path list
information.
Display BGP community list
information.
Display BGP extended community
list information.
Display IPv4 prefix list statistics.
Display IPv6 prefix list statistics.
Display routing policy information.
Clear IPv4 prefix list statistics.
Clear IPv6 prefix list statistics.
Command
system-view
route-policy route-policy-name
{ deny | permit } node node-number
continue [ node-number ]
Command
display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ]
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
display ip extcommunity-list
[ ext-comm-list-number ] [ | { begin | exclude |
include } regular-expression ]
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
display ip ipv6-prefix [ ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
display route-policy [ route-policy-name ] [ | { begin
| exclude | include } regular-expression ]
reset ip ip-prefix [ ip-prefix-name ]
reset ip ipv6-prefix [ ipv6-prefix-name ]
367
Remarks
N/A
Not created by default.
Optional.
Not configured by default.
The node number specified must
be larger than the current node
number.
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in user
view
Available in user
view