HP MSR2000 series Configuration Manual page 96

Step
3. Configure OSPF to
redistribute routes from
another protocol.
4. Configure OSPF to filter
redistributed routes before
advertisement.
Configuring OSPF to redistribute a default route
Using the import-route command cannot redistribute a default external route. To do so, you must use the
default-route-advertise command.
To configure OSPF to redistribute a default external route:
Step
1. Enter system view.
2. Enter OSPF view.
3. Redistribute a default
route.
Configuring the default parameters for redistributed routes
You can configure default parameters, such as the cost, upper limit, tag and type for redistributed routes.
Tags indicate information related to protocols. For example, when redistributing BGP routes, OSPF uses
tags to identify AS IDs.
To configure the default parameters for redistributed routes:
Step
1. Enter system view.
2. Enter OSPF view.
Command
import-route protocol [ process-id |
all-processes | allow-ibgp ] [ cost cost | type
type | tag tag | route-policy
route-policy-name ] *
filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ protocol
[ process-id ] ]
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
default-route-advertise [ [ [ always |
permit-calculate-other ] | cost cost |
route-policy route-policy-name | type type ]
* | summary cost cost ]
Command
system-view
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
83
Remarks
Not configured by default
Optional
Not configured by default
Remarks
N/A
N/A
Not redistributed by default.
The default-route-advertise
summary cost command is
applicable only to VPN, and
the default route is
redistributed in a Type-3 LSA.
The PE router advertises the
default route to the CE router.
Remarks
N/A
N/A