Technical Data - Cables - Siemens SINAMICS V90 Operating Instructions Manual

General information
2.6 Technical data
2.6.3

Technical data - cables

Parameter
General technical data
Jacket material
Number of cores
Operation temperature (°C)
Shielding
Minimum bending radius,
static (mm)
Minimum bending radius,
dynamic (mm)
Oil resistance
Flame-retardant
Certification
Specific technical data
Cable used for 200 V variant servo drive + low inertia motor of 0.05 kW to 1 kW
Rated voltage (V)
Cross-section of cores (mm
Outer diameter (mm)
Degree of protection (motor-
side only)
Bending cycles
Cable used for 200 V variant servo drives + low inertia motors of 1.5 kW to 2 kW, and for 400 V variant servo drives + high
inertia motors of 0.4 kW to 7 kW
Cross-section of cores (mm
66
MOTION-CONNECT 300
Power Cable
PVC
4
-25 to 80
Yes
Coverage ≥ 60%:
•
For 200 V variant servo drives + low inertia motors of 0.05 kW to 1 kW
Coverage ≥ 85%:
•
For 200 V variant servo drives + low inertia motors of 1.5 kW to 2 kW, and for 400 V
variant servo drives + high inertia motors of 0.4 kW to 7 kW
5 x outer diameter
155
EN60811-2-1 fulfilled
EN60332-1-1 to 1-3 fulfilled
RoHS, UL, CE
300/500
) 4 x 0.75
2
ø (6.7±0.4)
IP20
100000:
Maximum acceleration 3 m/s
)
2
4 x 1.5:
•
For high inertia motors of
0.4 kW to 1 kW
4 x 2.5:
•
For low inertia motors of
1.5 kW to 2 kW and high
inertia motors of 1.5 kW
to 7 kW
MOTION-CONNECT 300
Encoder Cable
PVC
10
RoHS
30
3 x 2 x 0.20 + 4 x 0.25
ø (7.2±0.3)
, maximum speed 40 m/min
2
3 x 2 x 0.22 + 4 x 0.25
Operating Instructions, 04/2017, A5E37208830-003
MOTION-CONNECT 300
Brake Cable
PVC
2
RoHS
30
2 x 0.75
ø (6.1±0.3)
2 x 0.75
SINAMICS V90, SIMOTICS S-1FL6