Siemens SINAMICS V90 Operating Instructions Manual page 58

General information
2.6 Technical data
Article No. 1FL60...
Moment of inertia [10
-4
kgm ]
2
Moment of inertia (with
brake) [10 kgm ]
-4 2
Recommended load to mo-
tor inertia ratio
Operating temperature [°C]
Storage temperature [°C]
Maximum noise level [dB]
Rated voltage
(V)
Rated current
(A)
Holding brake
Holding
torque [Nm]
brake
Maximum
brake opening
time [ms]
Maximum
brake closing
time [ms]
Maximum
number of
emergency
stops
Oil seal lifetime [h]
Encoder lifetime [h]
Protection degree of motor
body
Protection degree of cable
end connector
Weight [kg] With brake
Without brake
When the surrounding temperature is between 30 °C and 40 °C, the 1FL605 motor will have a power derating of 10%.
1)
Restricted emergency stop operation is permissible. Up to 2000 braking operations for the motors of 0.05 kW to 1 kW,
2)
and 200 braking operations for the motors of 1.5 kW to 2 kW can be executed with 300% rotor moment of inertia as ex-
ternal moment of inertia from a speed of 3000 rpm without the brake being subject to an inadmissible amount of wear.
This lifetime is only for reference. When a motor keeps running at 80% rated value and the surrounding temperature is
3)
30 °C, the encoder lifetime can be ensured.
Note
The data of rated torque, rated power, maximum torque, and armature resistance in the
above table allows a tolerance of 10%.
58
22 24 32
0.031 0.052 0.214
0.038 0.059 0.245
Max. 30x
1FL602❑, 1FL603❑ and 1FL604❑: 0 to 40 (without power derating)
1FL605❑: 0 to 30 (without power derating)
-20 to +65
60
24 ± 10%
0.25 0.3
0.32 1.27
35 75
10 10
2000
2)
3000 to 5000
> 20000
3)
IP 65
IP20
0.70 0.86 1.48
0.47 0.63 1.02
34 42 44
0.351 0.897 1.15
0.381 1.06 1.31
Max. 20x
1)
0.35
3.18
105
15
1.92 3.68 4.20
1.46 2.80 3.39
Operating Instructions, 04/2017, A5E37208830-003
52 54
2.04 2.62
2.24 2.82
Max. 15x
0.57
6.37
90
35
-
6.76 8.00
5.35 6.56
SINAMICS V90, SIMOTICS S-1FL6