Securing The Cables - Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual

Mounting and connecting the device
3.4 Connecting the device
3.4.9

Securing the cables

After the power-up test, secure the connected cables with a strain relief.
Requirement
The strain relief plate is mounted, see section "Installing a strain relief (Page 38)".
HMI devices with display diagonal ≤ 12"
For devices with ≤ 12" display diagonal, secure the cables to the strain relief plate and to the
plastic strain relief elements supplied.
The following figures use the MTP700 Unified Comfort as an example to show how to install
the plastic strain relief elements.
Next, use cable ties to secure the cables to the marked fixing elements.
54
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA