Assembly Of Cable Connectors On The Motor Side - Siemens SINAMICS V90 Operating Instructions Manual

Appendix
A.2 Assembly of cable connectors on the motor side
A.2

Assembly of cable connectors on the motor side

Power connector assembly
Power cable used for low inertia motors with a shaft height of 20 mm to 40 mm
Note
Brake connector assembly
The assembly of the brake connector used for low inertia motors with a shaft height of
20 mm to 40 mm follows the procedure as described in the figure above for a power
connector.
304
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2017, A5E37208830-003