Siemens SINAMICS V90 Operating Instructions Manual page 260

Parameters
11.2 Parameter list
Read-only parameters
Par. No. Name
r0020 Speed setpoint smoothed
Description: Displays the currently smoothed speed setpoint at the input of the speed controller or U/f charac-
teristic (after the interpolator).
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The speed setpoint is available smoothed (r0020) and unsmoothed.
r0021 Actual speed smoothed
Description: Displays the smoothed actual value of the motor speed.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The speed actual value is available smoothed (r0021) and unsmoothed.
r0026 DC link voltage smoothed
Description: Displays the smoothed actual value of the DC link voltage.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The DC link voltage is available smoothed.
r0027 Absolute actual current smoothed
Description: Displays the smoothed absolute actual current value.
Notice: This smoothed signal is not suitable for diagnostics or evaluation of dynamic operations. In this case,
the unsmoothed value should be used.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The absolute current actual value is available smoothed (r0027) and unsmoothed.
r0029 Current actual value field-generating smoothed
Description: Displays the smoothed field-generating actual current.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The field-generating current actual value is available smoothed (r0029) and unsmoothed.
r0030 Current actual value torque-generating smoothed
Description: Displays the smoothed torque-generating actual current.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque-generating current actual value is available smoothed.
r0031 Actual torque smoothed
Description: Displays the smoothed torque actual value.
Note: Smoothing time constant = 100 ms
The signal is not suitable as a process quantity and may only be used as a display quantity.
The torque actual value is available smoothed (r0031) and unsmoothed.
r0034 Motor utilization thermal
Description: Displays the motor utilization from motor temperature model 1 (I
260
Unit Data type
rpm Float
rpm Float
V Float
Arms Float
Arms Float
Arms Float
Nm Float
% Float
t) or 3.
2
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2017, A5E37208830-003