Siemens SINAMICS V90 Operating Instructions Manual page 253

Par. No. Name
p8922[0... PROFIdrive: Default
3] gateway of station
Description: Sets the default gateway for the onboard PROFINET interface on the Control Unit.
The active default gateway is displayed in r8932.
Note: The interface configuration (p8920 and following) is activated with p8925.
The parameter is not influenced by setting the factory setting.
p8923[0... PROFIdrive: Subnet
3] mask of station
Description: Sets the subnet mask for the onboard PROFINET interface on the Control Unit.
The active subnet mask is displayed in r8933.
Note: The interface configuration (p8920 and following) is activated with p8925.
The parameter is not influenced by setting the factory setting.
p8925 PROFIdrive: Interface
configuration
Description: Setting to activate the interface configuration for the onboard PROFINET interface on the Control
Unit.
p8925 is automatically set to 0 at the end of the operation.
p8925 = 0: No function
•
p8925 = 2: Save and activate configuration
•
The interface configuration (p8920 and following) is saved and activated after the next POWER ON.
p29000 * Motor ID
Description: Motor type number is printed on the motor rating plate as motor ID.
For a motor with an incremental encoder, users need to manually input the parameter value.
For a motor with an absolute encoder, the drive automatically reads the parameter value.
p29001 Reversal of motor direc-
tion
Description: Reversal of motor running direction. By default, CW is the positive direction while CCW the nega-
tive direction. After changing of p29001, reference point will lost, A7461 will remind user to referencing again.
0: No reversal
•
1: Reverse
•
p29002 BOP display selection
Description: Selection of BOP operating display.
0: Actual speed (default)
•
1: DC voltage
•
2: Actual torque
•
3: Actual position
•
4: Position following error
•
p29003 Control mode
Description: Selection of control mode.
1: Basic positioner control mode (EPOS)
•
2: Speed control mode (S)
•
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2017, A5E37208830-003
Min Max
0 255
0 255
0 3
0 65535
0 1
0 4
1 2
Factory Unit Data
Setting type
0 - U8
0 - U8
0 - U8
0 - U16
0 - I16
0 - I16
2 - I16
Parameters
11.2 Parameter list
Effective Can be
changed
IM T, U
IM T, U
IM T, U
IM T
IM T
IM T, U
IM T
253